Use of this website is subject to Quantums' Terms of Use and Privacy Policy.

  View Cart     Sign in
image image image

Your Flash Will Be Assimilated !!!

CoPilot... User-Friendly Wireless TTL Flash Controller
With Auto-Focus Assist

CoPilots’ infrared Auto-Focus Assist helps your camera focus in low light Mount a CoPilot in the hot shoe of your camera and set ratios of up to 3 groups of remote Qflash. No complicated LCD displays... Instant dial settings TTL control of "local" Qflash...   See the CoPilot video.    

Your Flash Will Be Assimilated !!!

CoPilot... User-Friendly Wireless TTL Flash Controller
With Auto-Focus Assist\

Ease to adjust dials control Manual or TTL Ratios settings on up to 3 remote groups of Qflash or Trio.    

Your Flash Will Be Assimilated !!!

CoPilot... User-Friendly Wireless TTL Flash Controller
With Auto-Focus Assist

The "Local" ports allows you to wire your local Qflash directly to CoPilot... even your early non "R" model Qflash 2d. A USB port is built in for firmware updates.  

Your Flash Will Be Assimilated !!!

CoPilot... User-Friendly Wireless TTL
Flash Controller With Auto-Focus Assist

Photographers can now READ_MORE trigger and quickly set ratios for three groups of radio controlled Qflash and/or Trio. Set lighting ratios on the fly, right from your camera. Simply turn three controls on the CoPilot to  instantly adjust lighting ratios as you shoot.

Mix and match all the flashes you own. CoPilot controls remote Qflash TRIOs or T5dRs. And it triggers any combination of non-Quantum flashes connected to a Quantum FreeXwire receiver.
  • CoPilot (QF91C) for Canon DSLR cameras
  • CoPilot (QF91N) for Nikon DSLR cameras
  • IR Auto-Focus Assist helps your camera focus in low light
  • Mounts in your camera's hot shoe
  • Set ratios of up to 3 groups of remote Qflash.
  • No complicated LCD displays... Instant dial settings
  • TTL control of "local" Qflash... Models T5dR, 4d, 3d, 2d ...connected to the accessory connector of CoPilot
  • Reliable digital radio wireless up to 300’ (100m)
  • Use any number of flashes in each remote group
  • Manual or Auto Triggering of non-Quantum
        flash with FreeXwire FW8R or FW10W
For this photo shoot CoPilot was used to control two Qflash T5dR’s and one Qflash TRIO.

A T5dR has a snoot (QF61B) attached doing double duty as a hair light, plus separating the subject from the background. The other T5dR is in a 12x12 softbox (QF68) for fill light and the TRIO has a Wide Angle Diffuser (QF67A) attached to the front of the reflector for soft diffused light to the subjects face.

Power levels for all three flashes were set and adjusted, plus or minus from the CoPilot until the proper lighting was attained.

Creative Control
At Your Fingertips

The CoPilot controls 3 independent remote flash groups without a local flash, or 2 remote groups with a local Qflash connected to the CoPilot accessory socket. Each flash group can be set to Manual or TTL. Power and ratio settings are easily controlled by a dial for each flash group.


Good news for photographers still using their older Qflashes (T2D,T3D T4D, T5D). The CoPilot gives you the ability to use your old flash as a local flash while still getting the TTL ratio control of remotes offered by the newer T5dR and TRIO.


Remote flash groups consist of Quantum TRIO, Qflash T5dR, or any non-Quantum flash that can be triggered in Manual and Auto mode only, by a FreeXwire wireless receiver. Add any number of remotes to any remote group.

With its patterned sensor the infrared auto-focus assist of the CoPilot helps your camera to quickly focus and shoot indoors or outside in low light conditions.

Specifications:

WT: 5.2 oz (147.42 g)
Length: 3.6 in ( 9.14 cm)
Height: 1.8 in (4.57 cm)
Width: 2.3 in (5.84 cm)
Range: 300 ft (100 m